Men’s Avirex Black Iconic Studded Leather Jacket

Studded Icon Artwork Recasts Sleek Urban Bomber

The men’s Avirex black iconic studded leather jacket starts with a restrained front, then reveals progressively stronger hardware detail around the body. Dark metal studs follow the point collar, raglan-inspired sleeve panels, and pocket welts before filling the raised AVIREX and USA letters across the back. The monochrome finish keeps the design coordinated while light makes each metal accent visible.

This hardware-led design sits naturally within our limited-edition Avirex outerwear, yet its smooth shell and mapped studs distinguish it from croc-embossed, suede, and colorful varsity options in the same collection.

Supple Hide Carries Controlled Hardware Weight

The supplied construction identifies genuine goatskin leather at approximately 1.0 mm. That specification gives the bomber enough substance for the studs and applied rear letters while maintaining a softer hand than an especially rigid heavyweight hide. Studded areas can feel firmer than the undecorated center panels because the hardware limits local flex.

Gunmetal Placement Follows Garment Architecture

The embellishment uses small, low-profile round studs rather than long projecting spikes. Their finish reads as gunmetal, pewter, or muted antique silver depending on the light. Spacing remains deliberate: the hardware traces structural zones while leaving broad sections of smooth black leather visible.

Studs appear across the collar, outer shoulders, sleeve panels, pocket borders, and rear lettering. This distributed layout adds visual movement from every angle without turning the center front into a dense hardware field.

Turn-Down Collar Establishes a Sharp Frame

A structured leather point collar shapes the neckline and carries several rows of round metal studs. Tonal edge stitching helps define both collar leaves, while the hardware continues the decoration from shoulder to shoulder. Unlike a classic knit-neck bomber, this design keeps a firmer shirt-collar profile.

Customers comparing other waist-length constructions can explore our modern men’s bomber silhouettes, where collars, materials, linings, and pocket layouts vary by product.

Raglan Seaming Opens Shoulder Movement

Curved seams travel from the collar area toward the underarms, creating a raglan-inspired shoulder line. Long outer-sleeve panels carry spaced studs, while the inner arms remain cleaner for a more balanced look. Tonal piping-like seam edges define the panels, but no separate contrasting cord is visible.

The rounded upper-body construction gives the bomber relaxed sleeve volume without turning the fit into a dropped-shoulder oversize cut. Hardware stays concentrated away from the highest-friction inner-arm zones.

Tonal Chest Badge Keeps Front Restrained

A raised black Avirex crest sits on the wearer’s left chest. Embroidery, layered borders, a shield motif, and a 1975 reference make the emblem readable through texture rather than bright color. The broad center-front leather panels remain mostly smooth, giving the smaller crest room to register.

Angled Pocket Welts Add Hand-Level Detail

Two slanted welt pockets sit on the lower front. Each narrow leather border carries a straight sequence of studs, visually connecting storage areas with the collar and sleeves. No exterior zip, snap, or flap closure appears in the photographs, so small valuables should be carried carefully unless a secure internal pocket is separately confirmed.

Shoppers drawn to harder-edged hardware treatments can also compare our hardware-led biker styles, while remembering that this Avirex piece is a fashion bomber and not certified riding protection.

Exposed Fastener Anchors the Center

A dark full-length zipper creates a straight central line from collar to hem. Matching leather facings sit on both sides, and no storm flap covers the closure. The visible ring-style pull provides a substantial grip, but the photographs do not prove a two-way zipper, so that function is not claimed.

Dimensional Rear Lettering Creates Maximum Impact

The back carries the jacket’s defining composition. Separate black leather letters form an arched AVIREX treatment across the shoulders. A circular embroidered shield occupies the center, and individual USA letters sit below. Rows of dark metallic studs fill the letters while tonal stitched borders keep every appliqué sharply outlined.

A center-back seam divides the artwork, curved shoulder seams frame it, and a horizontal line separates the main panel from the lower section. The construction keeps the large graphic organized rather than floating on one uninterrupted sheet of leather.

Knitted Edges Shape Wrist and Waist

Black rib knit closes the sleeves and draws the lower body inward. The cuffs provide flexible contact at the wrists, while the waistband creates the compact, slightly bloused proportion associated with bomber jackets. At the front, leather sections align with the zipper between the ribbed side panels for a clean finish.

Cotton-Blend Lining Softens Daily Layering

The supplied interior composition is 70% cotton and 30% polyester. Cotton contributes a softer hand, while polyester supports shape retention and everyday durability. This is described as a fabric lining rather than insulated or quilted winter construction, so no thermal rating is implied.

Regular Fit Allows Deliberate Sizing Choices

The photographed cut shows defined shoulders, moderate chest ease, relaxed sleeves, a waist-length body, and ribbing that sits closer at the wrists and hem. Choose the measurement set that produces this regular bomber profile rather than relying on a familiar clothing label alone.

For extra sweatshirt room or a looser streetwear effect, compare one size up as well as your usual size. Measure chest, shoulders, sleeve, and intended hem position using the store’s measurement instructions for leather jackets; do not size up automatically from height alone.

Product Passport Summarizes Confirmed Attributes

• Product: Men’s Avirex Black Iconic Studded Leather Jacket
• Category: Men’s studded leather bomber jacket
• Color: Black
• Supplied leather: Genuine goatskin leather according to the provided product data
• Supplied thickness: Approximately 1.0 mm
• Surface: Smooth black leather with a gentle sheen
• Hardware: Low-profile dark metallic round studs
• Stud placement: Collar, shoulders, sleeves, pocket welts, AVIREX and USA back letters
• Collar: Structured leather point collar
• Closure: Exposed center-front metal zipper with ring-style pull
• Pockets: Two angled open welt pockets
• Branding: Tonal chest crest plus studded rear appliqués and central shield
• Trim: Black rib-knit cuffs and waistband
• Lining: 70% cotton and 30% polyester according to supplied data
• Fit: Regular bomber fit; compare one size larger for a roomier look
• Approximate weight: 1.6–1.8 kg depending on size
• Protective certification: None supplied
• Weather rating: None supplied

Keep the rest of the outfit visually quiet: solid tees, washed denim, wide black trousers, or minimal sneakers allow the hardware and rear lettering to remain dominant. More combinations are available in the indexed men’s leather jacket outfit blueprint.

Separate Care Methods Protect Each Component

• Smooth leather: Dust with a soft cloth; patch-test a compatible black-leather product before applying it sparingly.
• Metal studs: Wipe individually without soaking; inspect for movement and never tighten unknown fasteners with household tools.
• Applied letters: Avoid rough backpack straps, folding, or prolonged pressure across the raised rear design.
• Front zipper: Keep teeth clear and guide the pull gently instead of forcing a snag.
• Rib knit: Keep leather creams away from cuffs and waistband; blot moisture and let them air-dry.
• Fabric lining: Air after wear and use a professional leather-garment cleaner for deep stains.
• Storage: Hang on broad shoulders inside a breathable cover, away from direct heat, sunlight, and delicate garments.

Practical Answers Address Buyer Concerns

Are the decorations studs or long spikes?
They are low-profile round studs. No long projecting spikes are visible in the supplied images.

Where is the metal hardware placed?
Studs appear on the point collar, shoulders, outer sleeves, pocket welts, and the AVIREX and USA back lettering.

Is the rear graphic simply printed?
No. The photographs show separately applied letters with raised borders, tonal stitching, embedded studs, and a dimensional central crest.

Can the studs catch on other materials?
Any attached metal hardware can snag delicate fabrics or mark nearby surfaces. Store the jacket separately and avoid abrasive straps across the decorated areas.

Do the hand pockets have closures?
No exterior zip, snap, or flap is visible on the angled welt pockets.

What is the lining composition?
The supplied specification lists a soft fabric lining made from 70% cotton and 30% polyester.

How heavy is this studded bomber?
The supplied approximate range is 1.6–1.8 kg, with size influencing the final weight.

Should I order a larger size for streetwear styling?
Choose measurements that match the intended regular fit. Compare one size up only when you want extra layer room or a deliberately looser silhouette.

What should I do if a stud becomes loose?
Stop wearing the jacket until a leather-repair professional checks the fastening. Improvised tightening can tear or mark the hide.

Is this certified motorcycle safety equipment?
No armor, impact-zone reinforcement, or protective certification has been supplied. Treat it as fashion outerwear.